Back
5: Review Questions
Name the two most commonly used systems of measurement.
What are the standard units for length and mass in the SI Metric system?
List five common metric prefixes.
Which of the following is an incorrect metric notation?
A. 33 mm.
B. 0.39 km.
C. 34,000 km.
D. 42 kPa.
Convert the following values:
A. One inch = _____ millimeters
B. 12 meters = _____ yards
C. 10 quarts = _____ liters
D. 12 milliliters = _____ fluid ounces
E. 400 pounds = _____ kilograms
F. 25 meters/second = _____ feet/second
G. 68°F = _____ °C
A point measures approximately _____ of an inch.
The pica is approximately _____ of an inch.
What device is commonly used to measure the point size of type?
The amount of vertical space between lines of type is called _____.
A ream of bond/book paper consists of _____ sheets.
Name four common grades of paper.
List the three ISO series for paper and envelopes and the uses for each series.
What is the
basis weight
of paper?
List four components of a typical desktop publishing system.
Image resolution is measured in ______ or ______.
Screen sizes below 75 lines are considered ______, while sizes above 150 lines are considered _____.
A screen angle of _____ degrees is normally used for the color black when making color separations.
Why must each color separation screen angle be set differently?
A 10% screen tint would result in _____ ink deposited than a 20% tint.
Name the two types of densitometers.
What measuring device is used to determine color values?
Your Name
Your E-mail
Send yourself a copy
Your Instructor's E-mail
Additional Recipient's E-mail (optional)
Comments
I confirm my input is correct and am ready to submit