Back
7: Know and Understand
Tools made from _____ significantly changed the development of tool technology and increased the rate at which civilizations could grow and develop.
When a saw blade cuts, material is removed from a slot the width of its offset teeth, called the _____.
A back saw is often used with a(n) _____ for cutting precise angles in trim work.
Drill bits for hand-powered drills are usually either _____ bits or twist drill bits.
Always apply enough _____ to the back of a hand drill to keep the cutting edges of the bit engaged and removing material.
_____ and _____ are used in a process called “chasing the thread” to clean contaminants and corrosion from the threads of fasteners.
The effectiveness of a wood chisel depends on its _____.
True or False?
A hammer designed for driving nails can be safely used to strike a cold chisel.
A. True
B. False
True or False?
Files have rows of multiple triangular-shaped teeth that remove material more aggressively than rasps.
A. True
B. False
When operated by hand, a moderate-size vise can easily generate force in excess of _____ lb.
Woodworking bench vises are commonly mounted _____ the working surface of the table.
A. ten to twelve inches below
B. flush with
C. six to eight inches above
D. in the middle of
Parallel clamps are not suitable for hot metal work because they are made of _____.
The jaws of most pliers are much shorter than the _____ to provide a greater mechanical advantage.
When using any hammer, concentrate your focus on the _____ to maximize your accuracy and power.
A. swing of the hammer
B. surface of the material
C. hammer’s head
D. target
A(n) _____ is a tool that fits into the square hole in an anvil and is used to cut or form a detailed metal shape.
What is a tapered punch designed to do?
A(n) _____ wrench consists of an open-end wrench on one end and a box-end wrench on the other.
Under most conditions, using a properly fitted box-end wrench is preferable to using a(n) _____ wrench on hexagonal nuts and bolts due to a lower risk of slippage.
An Allen wrench fits into what shape of recess in the top of a screw?
A. Hexagonal.
B. Square.
C. Six-pointed star.
D. Slotted.
What are five factors to consider when purchasing a hand tool?
Why is it important to keep hand tools clean and properly organized?
Your Name
Your E-mail
Send yourself a copy
Your Instructor's E-mail
Additional Recipient's E-mail (optional)
Comments
I confirm my input is correct and am ready to submit