Back
6: Know and Understand
When the same quantity is measured repeatedly with the same tool and the same measurement in standardized units is reached, the tool is said to have _____.
A tool with _____ is capable of measuring objects down to very small fractional divisions of a unit of measure.
Why is the metal hook on the end of a tape measure blade made to slide back and forth a short distance?
The difference between a Vernier caliper, a dial caliper, and a digital caliper is the ease or simplicity of the way the _____ are read.
Spirit levels use the natural force of _____ to locate level or plumb lines or planes.
True or False?
To check a level for accuracy, take a reading on a level surface and reverse the direction of the tool for a second reading in the same location; both measurements should match.
A. True
B. False
The stock on a try square or the fence of a Speed® Square can be set against the edge of a board so that a square or _____ line may be drawn across the width to mark a cut location.
If you determine during construction of a six-sided gazebo that a large number of boards will need to be marked and cut at a 60° angle, a(n) _____ can be used to duplicate all of the angles after the first board is measured and cut.
_____ pencils leave a silver mark on metal that is more precise and often has better staying potential than soapstone.
Precision measuring tools commonly come with a(n) _____ that reduces the risk of damage during storage and transport.
A. owner’s manual
B. reference booklet
C. protective case
D. None of the above.
Your Name
Your E-mail
Send yourself a copy
Your Instructor's E-mail
Additional Recipient's E-mail (optional)
Comments
I confirm my input is correct and am ready to submit